mirror of
https://codeberg.org/forgejo/forgejo.git
synced 2024-11-17 19:46:18 +00:00
cad9184a36
During registration, one may be required to give their email address, to be verified and activated later. However, if one makes a mistake, a typo, they may end up with an account that cannot be activated due to having a wrong email address. They can still log in, but not change the email address, thus, no way to activate it without help from an administrator. To remedy this issue, lets allow changing the email address for logged in, but not activated users. This fixes gitea#17785. Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu> (cherry picked from commitaaaece28e4) (cherry picked from commit639dafabec) (cherry picked from commitd699c12ceb) [GITEA] Allow changing the email address before activation (squash) cache is always active This needs to be revisited because the MailResendLimit is not enforced and turns out to not be tested. Seee7cb8da2a8* Always enable caches (#28527) (cherry picked from commit43ded8ee30) Rate limit pre-activation email change separately Changing the email address before any email address is activated should be subject to a different rate limit than the normal activation email resending. If there's only one rate limit for both, then if a newly signed up quickly discovers they gave a wrong email address, they'd have to wait three minutes to change it. With the two separate limits, they don't - but they'll have to wait three minutes before they can change the email address again. The downside of this setup is that a malicious actor can alternate between resending and changing the email address (to something like `user+$idx@domain`, delivered to the same inbox) to effectively halving the rate limit. I do not think there's a better solution, and this feels like such a small attack surface that I'd deem it acceptable. The way the code works after this change is that `ActivatePost` will now check the `MailChangeLimit_user` key rather than `MailResendLimit_user`, and if we're within the limit, it will set `MailChangedJustNow_user`. The `Activate` method - which sends the activation email, whether it is a normal resend, or one following an email change - will check `MailChangedJustNow_user`, and if it is set, it will check the rate limit against `MailChangedLimit_user`, otherwise against `MailResendLimit_user`, and then will delete the `MailChangedJustNow_user` key from the cache. Fixes #2040. Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu> (cherry picked from commite35d2af2e5) (cherry picked from commit03989418a7) (cherry picked from commitf50e0dfe5e)
369 lines
12 KiB
Go
369 lines
12 KiB
Go
// Copyright 2017 The Gitea Authors. All rights reserved.
|
|
// SPDX-License-Identifier: MIT
|
|
|
|
package user_test
|
|
|
|
import (
|
|
"fmt"
|
|
"testing"
|
|
|
|
"code.gitea.io/gitea/models/db"
|
|
"code.gitea.io/gitea/models/unittest"
|
|
user_model "code.gitea.io/gitea/models/user"
|
|
"code.gitea.io/gitea/modules/util"
|
|
|
|
"github.com/stretchr/testify/assert"
|
|
)
|
|
|
|
func TestGetEmailAddresses(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
emails, _ := user_model.GetEmailAddresses(db.DefaultContext, int64(1))
|
|
if assert.Len(t, emails, 3) {
|
|
assert.True(t, emails[0].IsPrimary)
|
|
assert.True(t, emails[2].IsActivated)
|
|
assert.False(t, emails[2].IsPrimary)
|
|
}
|
|
|
|
emails, _ = user_model.GetEmailAddresses(db.DefaultContext, int64(2))
|
|
if assert.Len(t, emails, 2) {
|
|
assert.True(t, emails[0].IsPrimary)
|
|
assert.True(t, emails[0].IsActivated)
|
|
}
|
|
}
|
|
|
|
func TestIsEmailUsed(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
isExist, _ := user_model.IsEmailUsed(db.DefaultContext, "")
|
|
assert.True(t, isExist)
|
|
isExist, _ = user_model.IsEmailUsed(db.DefaultContext, "user11@example.com")
|
|
assert.True(t, isExist)
|
|
isExist, _ = user_model.IsEmailUsed(db.DefaultContext, "user1234567890@example.com")
|
|
assert.False(t, isExist)
|
|
}
|
|
|
|
func TestAddEmailAddress(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
assert.NoError(t, user_model.AddEmailAddress(db.DefaultContext, &user_model.EmailAddress{
|
|
Email: "user1234567890@example.com",
|
|
LowerEmail: "user1234567890@example.com",
|
|
IsPrimary: true,
|
|
IsActivated: true,
|
|
}))
|
|
|
|
// ErrEmailAlreadyUsed
|
|
err := user_model.AddEmailAddress(db.DefaultContext, &user_model.EmailAddress{
|
|
Email: "user1234567890@example.com",
|
|
LowerEmail: "user1234567890@example.com",
|
|
})
|
|
assert.Error(t, err)
|
|
assert.True(t, user_model.IsErrEmailAlreadyUsed(err))
|
|
}
|
|
|
|
func TestAddEmailAddresses(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
// insert multiple email address
|
|
emails := make([]*user_model.EmailAddress, 2)
|
|
emails[0] = &user_model.EmailAddress{
|
|
Email: "user1234@example.com",
|
|
LowerEmail: "user1234@example.com",
|
|
IsActivated: true,
|
|
}
|
|
emails[1] = &user_model.EmailAddress{
|
|
Email: "user5678@example.com",
|
|
LowerEmail: "user5678@example.com",
|
|
IsActivated: true,
|
|
}
|
|
assert.NoError(t, user_model.AddEmailAddresses(db.DefaultContext, emails))
|
|
|
|
// ErrEmailAlreadyUsed
|
|
err := user_model.AddEmailAddresses(db.DefaultContext, emails)
|
|
assert.Error(t, err)
|
|
assert.True(t, user_model.IsErrEmailAlreadyUsed(err))
|
|
}
|
|
|
|
func TestDeleteEmailAddress(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
assert.NoError(t, user_model.DeleteEmailAddress(db.DefaultContext, &user_model.EmailAddress{
|
|
UID: int64(1),
|
|
ID: int64(33),
|
|
Email: "user1-2@example.com",
|
|
LowerEmail: "user1-2@example.com",
|
|
}))
|
|
|
|
assert.NoError(t, user_model.DeleteEmailAddress(db.DefaultContext, &user_model.EmailAddress{
|
|
UID: int64(1),
|
|
Email: "user1-3@example.com",
|
|
LowerEmail: "user1-3@example.com",
|
|
}))
|
|
|
|
// Email address does not exist
|
|
err := user_model.DeleteEmailAddress(db.DefaultContext, &user_model.EmailAddress{
|
|
UID: int64(1),
|
|
Email: "user1234567890@example.com",
|
|
LowerEmail: "user1234567890@example.com",
|
|
})
|
|
assert.Error(t, err)
|
|
}
|
|
|
|
func TestDeleteEmailAddresses(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
// delete multiple email address
|
|
emails := make([]*user_model.EmailAddress, 2)
|
|
emails[0] = &user_model.EmailAddress{
|
|
UID: int64(2),
|
|
ID: int64(3),
|
|
Email: "user2@example.com",
|
|
LowerEmail: "user2@example.com",
|
|
}
|
|
emails[1] = &user_model.EmailAddress{
|
|
UID: int64(2),
|
|
Email: "user2-2@example.com",
|
|
LowerEmail: "user2-2@example.com",
|
|
}
|
|
assert.NoError(t, user_model.DeleteEmailAddresses(db.DefaultContext, emails))
|
|
|
|
// ErrEmailAlreadyUsed
|
|
err := user_model.DeleteEmailAddresses(db.DefaultContext, emails)
|
|
assert.Error(t, err)
|
|
}
|
|
|
|
func TestMakeEmailPrimary(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
email := &user_model.EmailAddress{
|
|
Email: "user567890@example.com",
|
|
}
|
|
err := user_model.MakeEmailPrimary(db.DefaultContext, email)
|
|
assert.Error(t, err)
|
|
assert.EqualError(t, err, user_model.ErrEmailAddressNotExist{Email: email.Email}.Error())
|
|
|
|
email = &user_model.EmailAddress{
|
|
Email: "user11@example.com",
|
|
}
|
|
err = user_model.MakeEmailPrimary(db.DefaultContext, email)
|
|
assert.Error(t, err)
|
|
assert.EqualError(t, err, user_model.ErrEmailNotActivated.Error())
|
|
|
|
email = &user_model.EmailAddress{
|
|
Email: "user9999999@example.com",
|
|
}
|
|
err = user_model.MakeEmailPrimary(db.DefaultContext, email)
|
|
assert.Error(t, err)
|
|
assert.True(t, user_model.IsErrUserNotExist(err))
|
|
|
|
email = &user_model.EmailAddress{
|
|
Email: "user101@example.com",
|
|
}
|
|
err = user_model.MakeEmailPrimary(db.DefaultContext, email)
|
|
assert.NoError(t, err)
|
|
|
|
user, _ := user_model.GetUserByID(db.DefaultContext, int64(10))
|
|
assert.Equal(t, "user101@example.com", user.Email)
|
|
}
|
|
|
|
func TestReplaceInactivePrimaryEmail(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
email := &user_model.EmailAddress{
|
|
Email: "user9999999@example.com",
|
|
UID: 9999999,
|
|
}
|
|
err := user_model.ReplaceInactivePrimaryEmail(db.DefaultContext, "user10@example.com", email)
|
|
assert.Error(t, err)
|
|
assert.True(t, user_model.IsErrUserNotExist(err))
|
|
|
|
email = &user_model.EmailAddress{
|
|
Email: "user201@example.com",
|
|
UID: 10,
|
|
}
|
|
err = user_model.ReplaceInactivePrimaryEmail(db.DefaultContext, "user10@example.com", email)
|
|
assert.NoError(t, err)
|
|
|
|
user := unittest.AssertExistsAndLoadBean(t, &user_model.User{ID: 10})
|
|
assert.Equal(t, "user201@example.com", user.Email)
|
|
}
|
|
|
|
func TestActivate(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
email := &user_model.EmailAddress{
|
|
ID: int64(1),
|
|
UID: int64(1),
|
|
Email: "user11@example.com",
|
|
}
|
|
assert.NoError(t, user_model.ActivateEmail(db.DefaultContext, email))
|
|
|
|
emails, _ := user_model.GetEmailAddresses(db.DefaultContext, int64(1))
|
|
assert.Len(t, emails, 3)
|
|
assert.True(t, emails[0].IsActivated)
|
|
assert.True(t, emails[0].IsPrimary)
|
|
assert.False(t, emails[1].IsPrimary)
|
|
assert.True(t, emails[2].IsActivated)
|
|
assert.False(t, emails[2].IsPrimary)
|
|
}
|
|
|
|
func TestListEmails(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
// Must find all users and their emails
|
|
opts := &user_model.SearchEmailOptions{
|
|
ListOptions: db.ListOptions{
|
|
PageSize: 10000,
|
|
},
|
|
}
|
|
emails, count, err := user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.NotEqual(t, int64(0), count)
|
|
assert.True(t, count > 5)
|
|
|
|
contains := func(match func(s *user_model.SearchEmailResult) bool) bool {
|
|
for _, v := range emails {
|
|
if match(v) {
|
|
return true
|
|
}
|
|
}
|
|
return false
|
|
}
|
|
|
|
assert.True(t, contains(func(s *user_model.SearchEmailResult) bool { return s.UID == 18 }))
|
|
// 'org3' is an organization
|
|
assert.False(t, contains(func(s *user_model.SearchEmailResult) bool { return s.UID == 3 }))
|
|
|
|
// Must find no records
|
|
opts = &user_model.SearchEmailOptions{Keyword: "NOTFOUND"}
|
|
emails, count, err = user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.Equal(t, int64(0), count)
|
|
|
|
// Must find users 'user2', 'user28', etc.
|
|
opts = &user_model.SearchEmailOptions{Keyword: "user2"}
|
|
emails, count, err = user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.NotEqual(t, int64(0), count)
|
|
assert.True(t, contains(func(s *user_model.SearchEmailResult) bool { return s.UID == 2 }))
|
|
assert.True(t, contains(func(s *user_model.SearchEmailResult) bool { return s.UID == 27 }))
|
|
|
|
// Must find only primary addresses (i.e. from the `user` table)
|
|
opts = &user_model.SearchEmailOptions{IsPrimary: util.OptionalBoolTrue}
|
|
emails, _, err = user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.True(t, contains(func(s *user_model.SearchEmailResult) bool { return s.IsPrimary }))
|
|
assert.False(t, contains(func(s *user_model.SearchEmailResult) bool { return !s.IsPrimary }))
|
|
|
|
// Must find only inactive addresses (i.e. not validated)
|
|
opts = &user_model.SearchEmailOptions{IsActivated: util.OptionalBoolFalse}
|
|
emails, _, err = user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.True(t, contains(func(s *user_model.SearchEmailResult) bool { return !s.IsActivated }))
|
|
assert.False(t, contains(func(s *user_model.SearchEmailResult) bool { return s.IsActivated }))
|
|
|
|
// Must find more than one page, but retrieve only one
|
|
opts = &user_model.SearchEmailOptions{
|
|
ListOptions: db.ListOptions{
|
|
PageSize: 5,
|
|
Page: 1,
|
|
},
|
|
}
|
|
emails, count, err = user_model.SearchEmails(db.DefaultContext, opts)
|
|
assert.NoError(t, err)
|
|
assert.Len(t, emails, 5)
|
|
assert.Greater(t, count, int64(len(emails)))
|
|
}
|
|
|
|
func TestEmailAddressValidate(t *testing.T) {
|
|
kases := map[string]error{
|
|
"abc@gmail.com": nil,
|
|
"132@hotmail.com": nil,
|
|
"1-3-2@test.org": nil,
|
|
"1.3.2@test.org": nil,
|
|
"a_123@test.org.cn": nil,
|
|
`first.last@iana.org`: nil,
|
|
`first!last@iana.org`: nil,
|
|
`first#last@iana.org`: nil,
|
|
`first$last@iana.org`: nil,
|
|
`first%last@iana.org`: nil,
|
|
`first&last@iana.org`: nil,
|
|
`first'last@iana.org`: nil,
|
|
`first*last@iana.org`: nil,
|
|
`first+last@iana.org`: nil,
|
|
`first/last@iana.org`: nil,
|
|
`first=last@iana.org`: nil,
|
|
`first?last@iana.org`: nil,
|
|
`first^last@iana.org`: nil,
|
|
"first`last@iana.org": nil,
|
|
`first{last@iana.org`: nil,
|
|
`first|last@iana.org`: nil,
|
|
`first}last@iana.org`: nil,
|
|
`first~last@iana.org`: nil,
|
|
`first;last@iana.org`: user_model.ErrEmailCharIsNotSupported{`first;last@iana.org`},
|
|
".233@qq.com": user_model.ErrEmailInvalid{".233@qq.com"},
|
|
"!233@qq.com": nil,
|
|
"#233@qq.com": nil,
|
|
"$233@qq.com": nil,
|
|
"%233@qq.com": nil,
|
|
"&233@qq.com": nil,
|
|
"'233@qq.com": nil,
|
|
"*233@qq.com": nil,
|
|
"+233@qq.com": nil,
|
|
"-233@qq.com": user_model.ErrEmailInvalid{"-233@qq.com"},
|
|
"/233@qq.com": nil,
|
|
"=233@qq.com": nil,
|
|
"?233@qq.com": nil,
|
|
"^233@qq.com": nil,
|
|
"_233@qq.com": nil,
|
|
"`233@qq.com": nil,
|
|
"{233@qq.com": nil,
|
|
"|233@qq.com": nil,
|
|
"}233@qq.com": nil,
|
|
"~233@qq.com": nil,
|
|
";233@qq.com": user_model.ErrEmailCharIsNotSupported{";233@qq.com"},
|
|
"Foo <foo@bar.com>": user_model.ErrEmailCharIsNotSupported{"Foo <foo@bar.com>"},
|
|
string([]byte{0xE2, 0x84, 0xAA}): user_model.ErrEmailCharIsNotSupported{string([]byte{0xE2, 0x84, 0xAA})},
|
|
}
|
|
for kase, err := range kases {
|
|
t.Run(kase, func(t *testing.T) {
|
|
assert.EqualValues(t, err, user_model.ValidateEmail(kase))
|
|
})
|
|
}
|
|
}
|
|
|
|
func TestGetActivatedEmailAddresses(t *testing.T) {
|
|
assert.NoError(t, unittest.PrepareTestDatabase())
|
|
|
|
testCases := []struct {
|
|
UID int64
|
|
expected []*user_model.ActivatedEmailAddress
|
|
}{
|
|
{
|
|
UID: 1,
|
|
expected: []*user_model.ActivatedEmailAddress{{ID: 9, Email: "user1@example.com"}, {ID: 33, Email: "user1-2@example.com"}, {ID: 34, Email: "user1-3@example.com"}},
|
|
},
|
|
{
|
|
UID: 2,
|
|
expected: []*user_model.ActivatedEmailAddress{{ID: 3, Email: "user2@example.com"}},
|
|
},
|
|
{
|
|
UID: 4,
|
|
expected: []*user_model.ActivatedEmailAddress{{ID: 11, Email: "user4@example.com"}},
|
|
},
|
|
{
|
|
UID: 11,
|
|
expected: []*user_model.ActivatedEmailAddress{},
|
|
},
|
|
}
|
|
|
|
for _, testCase := range testCases {
|
|
t.Run(fmt.Sprintf("User %d", testCase.UID), func(t *testing.T) {
|
|
emails, err := user_model.GetActivatedEmailAddresses(db.DefaultContext, testCase.UID)
|
|
assert.NoError(t, err)
|
|
assert.Equal(t, testCase.expected, emails)
|
|
})
|
|
}
|
|
}
|