Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves#2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes#2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
- Remove unnecessary checks for `ctx.Repo.TreePath`, because it will
already early-return if it's empty.
- Simplify `performBlame` to extract the repoPath from the context.
- Don't render the topics, as they are not shown in the blame
page (there's a condition in the template for the blame page).
- Fix that `performBlame` doesn't call `NotFound`, it should instead
only return the error.
- Fix that the error handlings call `ServerError` instead of `NotFound`.
- Simplify `bypass-blame-ignore` to use `ctx.FormBool`.
- Remove `TreeLink`, `HasParentPath` and `ParentPath` as it's not used
in the blame template.
- Inline `BranchLink` and `RawFileLink` string operations.
- Move around `NumLines` to make it clear the error is handled.
- Less code, less things the code does, more readable and thus more
maintanable!
(cherry picked from commit e02baca55c)
(cherry picked from commit 74e00620ca)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4)
(cherry picked from commit 2d3c81d4f2)
(cherry picked from commit 624a61b3b8)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d)
(cherry picked from commit 70c5e2021d)
(cherry picked from commit 48b25be67a)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc6)
(cherry picked from commit 30d168bcc8)
(cherry picked from commit 19be82b7ef)
(cherry picked from commit 334b703b17)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes#126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212)
(cherry picked from commit 20d14f7844)
(cherry picked from commit 4359741431)
(cherry picked from commit 35cff45eb8)
(cherry picked from commit 2fc0d0b8a3)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes#1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e5460)
(cherry picked from commit 1868dec2e4)
(cherry picked from commit c3a8e98870)
(cherry picked from commit 9266b1916f)
(cherry picked from commit 8fa5ff65af)
- The endpoint was moved from being an API endpoint to an web endpoint
with JSON result. However the API context isn't the same as the web
context, for example the `ctx.Error` only takes in the first two
arguments into consideration and doesn't do logging, which is not the
same behavior as the API context where there's three arguments and does
do logging and only reveal the function + error if the user is admin.
- Remove any details in the error message and do the logging seperatly,
this is somewhat consistent with how other API endpoints behave.
- Ref: https://codeberg.org/forgejo/forgejo/issues/1998
(cherry picked from commit fe71e32ace)
(cherry picked from commit c89e0735fa)
(cherry picked from commit 4c04dcfc59)
(cherry picked from commit 66eae1041c)
(cherry picked from commit 7b70fa9392)
(cherry picked from commit abf64ca0e3)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
FixesCodeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b74439922)
(cherry picked from commit 337cf62c10)
(cherry picked from commit b6786fdb32)
(cherry picked from commit a5d2829a10)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72e)
(cherry picked from commit 42c55e494e)
(cherry picked from commit e3463bda47)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
(cherry picked from commit 9e5cce1afc)
(cherry picked from commit 2013fb3fab)
(cherry picked from commit 88b9d21d11)
(cherry picked from commit 72c020298e)
(cherry picked from commit 6525f730df)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a4)
(cherry picked from commit c58566403d)
(cherry picked from commit b8b3f6ab8b)
(cherry picked from commit 195520100b)
(cherry picked from commit 6e417087dd)
(cherry picked from commit ff91e5957a)
(cherry picked from commit 6626d5cc75)
(cherry picked from commit 62f8ab793b)
(cherry picked from commit e5bbf1a2d0)
(cherry picked from commit f5b8c8edea)
(cherry picked from commit 50948fa11b)
(cherry picked from commit 83a9f7f442)
(cherry picked from commit 679438b5d6)
(cherry picked from commit 17db07d6d0)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
(cherry picked from commit a57b214e36)
(cherry picked from commit fd287a9134)
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
As more and more options can be set for creating the repository, I don't
think we should put all of them into the creation web page which will
make things look complicated and confusing.
And I think we need some rules about how to decide which should/should
not be put in creating a repository page. One rule I can imagine is if
this option can be changed later and it's not a MUST on the creation,
then it can be removed on the page. So I found trust model is the first
one.
This PR removed the trust model selections on creating a repository web
page and kept others as before.
This is also a preparation for #23894 which will add a choice about SHA1
or SHA256 that cannot be changed once the repository created.
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Fix#27722Fix#27357Fix#25837
1. Fix the typo `BlockingByDependenciesNotPermitted`, which causes the
`not permitted message` not to show. The correct one is `Blocking` or
`BlockedBy`
2. Rewrite the perm check. The perm check uses a very tricky way to
avoid duplicate checks for a slice of issues, which is confusing. In
fact, it's also the reason causing the bug. It uses `lastRepoID` and
`lastPerm` to avoid duplicate checks, but forgets to assign the
`lastPerm` at the end of the code block. So I rewrote this to avoid this
trick.
3. It also reuses the `blocks` slice, which is even more confusing. So I
rewrote this too.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
This fixes a regression from #25859
If a tag has no Release, Gitea will show a Link to create a Release for
the Tag if the User has the Permission to do this, but the variable to
indicate that is no longer set.
Used here:
1bfcdeef4c/templates/repo/tag/list.tmpl (L39-L41)
Currently this feature is only available to admins, but there is no
clear reason why. If a user can actually merge pull requests, then this
seems fine as well.
This is useful in situations where direct pushes to the repository are
commonly done by developers.
---------
Co-authored-by: delvh <dev.lh@web.de>
1. Dropzone attachment removal, pretty simple replacement
2. Image diff: The previous code fetched every image twice, once via
`img[src]` and once via `$.ajax`. Now it's only fetched once and a
second time only when necessary. The image diff code was partially
rewritten.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Follow #23465 and #25624
This PR introduces the following improvements:
- We do not need to call `GetTags` to get tags because tags have been
loaded by `RepoAssignment`
ef90fdbd1d/modules/context/repo.go (L663-L668)
- Similarly, the number of tags and releases also have been loaded by
`RepoAssignment`, so the related code has been removed from the
handlers. The query condition of `GetReleaseCountByRepoID` in
`RepoAssignment` has been changed to include draft releases.
ef90fdbd1d/modules/context/repo.go (L538-L551)
- `releasesOrTags` function has been removed. The code for rendering
releases list and tags list moved to `Releases` and `TagList`
respectively.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/27136.
This does the following for Monaco's EOL setting:
1. Use editorconfig setting if present
2. Use the file's dominant line ending as detected by monaco, which uses
LF for empty file
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#26723
Add `ChangeDefaultBranch` to the `notifier` interface and implement it
in `indexerNotifier`. So when changing the default branch,
`indexerNotifier` sends a message to the `indexer queue` to update the
index.
---------
Co-authored-by: techknowlogick <matti@mdranta.net>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
You can currently visit `{repo}/issues/new` and create a blank issue,
even if it's disabled. This PR fixes this,
Fixes https://codeberg.org/forgejo/forgejo/issues/1356
Co-authored-by: Giteabot <teabot@gitea.io>
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
In GitHub, we can not rerun jobs if the workflow is disabled.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
the head branch is meaningless for a agit flow pull request, so should
not check it when reopen it.
related: #24231fix#26334
Signed-off-by: a1012112796 <1012112796@qq.com>
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Previously, the tooltip for this button was only shown after opening and
closing it once because it was only set after the server response, now
it shows before opening it.
This PR refactors a bunch of projects-related code, mostly the
templates.
The following things were done:
- rename boards to columns in frontend code
- use the new `ctx.Locale.Tr` method
- cleanup template, remove useless newlines, classes, comments
- merge org-/user and repo level project template together
- move "new column" button into project toolbar
- move issue card (shared by projects and pinned issues) to shared
template, remove useless duplicated styles
- add search function to projects (to make the layout more similar to
milestones list where it is inherited from 😆)
- maybe more changes I forgot I've done 😆Closes#24893
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#26129
Replace #26258
This PR will introduce a transaction on creating pull request so that if
some step failed, it will rollback totally. And there will be no dirty
pull request exist.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There are 2 kinds of ".Editorconfig" in code, one is `JSON string` for
the web edtior, another is `*editorconfig.Editorconfig` for the file
rendering (used by `TabSizeClass`)
This PR distinguish them with different names.
And by the way, change the default tab size from 8 to 4, I think few
people would like to use 8-size tabs nowadays.
Related to #26239
This PR makes some fixes:
- do not show the prompt for mirror repos and repos with pull request
units disabled
- use `commit_time` instead of `updated_unix`, as `commit_time` is the
real time when the branch was pushed
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
In the original implementation, we can only get the first 30 records of
the commit status (the default paging size), if the commit status is
more than 30, it will lead to the bug #25990. I made the following two
changes.
- On the page, use the ` db.ListOptions{ListAll: true}` parameter
instead of `db.ListOptions{}`
- The `GetLatestCommitStatus` function makes a determination as to
whether or not a pager is being used.
fixed#25990
The JSONRedirect/JSONOK/JSONError functions were put into "Base" context
incorrectly, it would cause abuse.
Actually, they are for "web context" only, so, move them to the correct
place.
And by the way, use them to simplify old code: +75 -196
- cancel running jobs if the event is push
- Add a new function `CancelRunningJobs` to cancel all running jobs of a
run
- Update `FindRunOptions` struct to include `Ref` field and update its
condition in `toConds` function
- Implement auto cancellation of running jobs in the same workflow in
`notify` function
related task: https://github.com/go-gitea/gitea/pull/22751/
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Close#25906
Succeeded logs:
```
[I] router: completed GET /root/test/issues/posters?&q=%20&_=1689853025011 for [::1]:59271, 200 OK in 127.7ms @ repo/issue.go:3505(repo.IssuePosters)
[I] router: completed GET /root/test/pulls/posters?&q=%20&_=1689853968204 for [::1]:59269, 200 OK in 94.3ms @ repo/issue.go:3509(repo.PullPosters)
```
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
Issue filters are being used on repo list page and on milestone issues
page, and the code is mostly duplicated.
This PR does the following changes:
- move issue filters into a shared template
- allow filtering milestone issues by project, so no need to hide this
filter on milestone issues page
- remove some dead code (e. g. issue actions in milestone issues
template)
- fix label filter dropdown width
---------
Co-authored-by: 6543 <6543@obermui.de>
Before:
After:
This issue comes from the change in #25468.
`LoadProject` will always return at least one record, so we use
`ProjectID` to check whether an issue is linked to a project in the old
code.
As other `issue.LoadXXX` functions, we need to check the return value
from `xorm.Session.Get`.
In recent unit tests, we only test `issueList.LoadAttributes()` but
don't test `issue.LoadAttributes()`. So I added a new test for
`issue.LoadAttributes()` in this PR.
---------
Co-authored-by: Denys Konovalov <privat@denyskon.de>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
A couple of notes:
* Future changes should refactor arguments into a struct
* This filtering only is supported by meilisearch right now
* Issue index number is bumped which will cause a re-index
There are too many files under `routers/web/repo` and the file
`routers/web/repo/setting.go` is too big.
This PR move all setting related routers' body functions under
`routers/web/repo/setting` and also split `routers/web/repo/setting.go`
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close#20976Close#20975
1. Fix the bug: the TOC in footer was incorrectly rendered as main
content's TOC
2. Fix the layout: on mobile, the TOC is put above the main content,
while the sidebar is put below the main content
3. Auto collapse the TOC on mobile
ps: many styles of "wiki.css" are moved from old css files, so leave
nits to following PRs.
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
close#24540
related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/9
- Runner side: https://gitea.com/gitea/act_runner/pulls/201
changes:
- Add column of `labels` to table `action_runner`, and combine the value
of `agent_labels` and `custom_labels` column to `labels` column.
- Store `labels` when registering `act_runner`.
- Update `labels` when `act_runner` starting and calling `Declare`.
- Users cannot modify the `custom labels` in edit page any more.
other changes:
- Store `version` when registering `act_runner`.
- If runner is latest version, parse version from `Declare`. But older
version runner still parse version from request header.
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
This addressees some things from #24406 that came up after the PR was
merged. Mostly from @delvh.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.
Fix#15367
Replaces #23070
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.
We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.
Some answer from ChatGPT as ref.
> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
>
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
>
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
>
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
>
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.
---------
Co-authored-by: delvh <dev.lh@web.de>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
