- Add `form-fetch-action` to indicate that this form POST to an link
that returns JSON and thus should be handled by Javascript code.
- Found by @fnetx
- Regression of https://codeberg.org/forgejo/forgejo/pulls/1793
- Make the 'Write' and 'Preview' tabs of the markdown editor interactive
by adding `href="#"`, this causes it to appear in the document order and
that while focused pressing `Enter` fires a click event (which isn't the
case by doing `tabindex="0"`).
- Resolves#2675
Refactor the webhook logic, to have the type-dependent processing happen
only in one place.
---
1. An event happens
2. It is pre-processed (depending on the webhook type) and its body is
added to a task queue
3. When the task is processed, some more logic (depending on the webhook
type as well) is applied to make an HTTP request
This means that webhook-type dependant logic is needed in step 2 and 3.
This is cumbersome and brittle to maintain.
Updated webhook flow with this PR:
1. An event happens
2. It is stored as-is and added to a task queue
3. When the task is processed, the event is processed (depending on the
webhook type) to make an HTTP request
So the only webhook-type dependent logic happens in one place (step 3)
which should be much more robust.
- the raw event must be stored in the hooktask (until now, the
pre-processed body was stored)
- to ensure that previous hooktasks are correctly sent, a
`payload_version` is added (version 1: the body has already been
pre-process / version 2: the body is the raw event)
So future webhook additions will only have to deal with creating an
http.Request based on the raw event (no need to adjust the code in
multiple places, like currently).
Moreover since this processing happens when fetching from the task
queue, it ensures that the queuing of new events (upon a `git push` for
instance) does not get slowed down by a slow webhook.
As a concrete example, the PR #19307 for custom webhooks, should be
substantially smaller:
- no need to change `services/webhook/deliver.go`
- minimal change in `services/webhook/webhook.go` (add the new webhook
to the map)
- no need to change all the individual webhook files (since with this
refactor the `*webhook_model.Webhook` is provided as argument)
(cherry picked from commit 26653b196bd1d15c532af41f60351596dd4330bd)
Conflicts:
services/webhook/deliver_test.go
trivial context conflict
# Preview Tab
- Removed the jQuery AJAX call and replaced with our fetch wrapper
- Tested the preview tab functionality and it works as before
# Diff Tab
- Removed the jQuery AJAX call and replaced with htmx
- Tested the diff tab functionality and it works as before
## htmx Attributes
- `hx-post="{{.RepoLink}}..."`: make a POST request to the endpoint
- `hx-indicator=".tab[data-tab='diff']"`: attach the loading indicator
to the tab body
- `hx-target=".tab[data-tab='diff']"`: target the tab body for swapping
with the response
- `hx-swap="innerHTML"`: swap the target's inner HTML
- `hx-include="#edit_area"`: include the value of the textarea (content)
in the request body
- `hx-vals='{"context":"{{.BranchLink}}"}'`: include the context in the
request body
- `hx-params="context,content"`: include only these keys in the request
body
# Demo using `fetch` and `htmx` instead of jQuery AJAX
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c1331d1f7ab60249ed2f080b24f3e32093fa708d)
Tested a few things, all working fine. Not sure if the chinese machine
translation is good.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 7e8c1c5ba18e1ac8861f429b825163b8210fd178)
Conflicts:
docs/content/contributing/guidelines-frontend.zh-cn.md
Gitea docs
* "mail/issue/default.tmpl": the body is rendered by backend
`markdown.RenderString() HTML`, it has been already sanitized
* "repo/settings/webhook/base_list.tmpl": "Description" is prepared by
backend `ctx.Tr`, it doesn't need to be sanitized
(cherry picked from commit dae7f1ebdbe19620f40e110b285f7c0ecd0bb33b)
Replace 18 `gt-` prefixes with `tw-` with perl replacement. I manually
checked them all with `rg` afterwards.
(cherry picked from commit a2e90014ec20a1085449a66061389cfe0d12260f)
Conflicts:
templates/repo/header.tmpl
because some of the header moved to header_fork.tmpl
Fix#29533, and add some tests for "base/paginate.tmpl"
(cherry picked from commit 8553b4600e3035b6f6ad6907c37cebd013fa4d64)
Conflicts:
services/contexttest/context_tests.go
trivial conflict because
"Improve user experience for outdated comments" was skipped
Add new option:
`visible`: witch can hide a specific field of the form or the created
content afterwards
It is a string array witch can contain `form` and `content`. If only
`form` is present, it wont show up in the created issue afterwards and
the other way around. By default it sets both except for markdown
As they are optional and github don't have any similar thing, it is non
breaking and also do not conflict with it.
With this you can:
- define "post issue creation" elements like a TODO list to track an
issue state
- make sure to have a checkbox that reminds the user to check for a
thing but dont have it in the created issue afterwards
- define markdown for the created issue (was the downside of using yaml
instead of md in the past)
- ...
## Demo
```yaml
name: New Contribution
description: External Contributor creating a pull
body:
- type: checkboxes
id: extern-todo
visible: [form]
attributes:
label: Contribution Guidelines
options:
- label: I checked there exist no similar feature to be extended
required: true
- label: I did read the CONTRIBUTION.MD
required: true
- type: checkboxes
id: intern-todo
visible: [content]
attributes:
label: Maintainer Check-List
options:
- label: Does this pull follow the KISS principe
- label: Checked if internal bord was notifyed
# ....
```
[Demo
Video](https://cloud.obermui.de/s/tm34fSAbJp9qw9z/download/vid-20240220-152751.mkv)
---
*Sponsored by Kithara Software GmbH*
---------
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 77e29e0c39392f142627303bd798fb55258072b2)
Before this change, if we had more than 200 entries being deferred in
loading, the entire table would get replaced thus losing any event
listeners attached to the elements within the table, such as the elipsis
button and commit list with tippy.
With this change we remove the previous javascript code that replaced
the table and use htmx to replace the table.
htmx attributes added:
- `hx-indicator="tr.notready td.message span"`: attach the loading
spinner to the files whose last commit is still being loaded
- `hx-trigger="load"` trigger the request-replace behavior as soon as
possible
- `hx-swap="morph"`: use the idiomorph morphing algorithm, this is the
thing that makes it so the elipsis button event listener is kept during
the replacement, fixing the bug because we don't actually replace the
table, only modifying it
- `hx-post="{{.LastCommitLoaderURL}}"`: make a post request to this url
to get the table with all of the commit information
As part of this change I removed the handling of partial replacement in
the case we have less than 200 "not ready" files. The first reason is
that I couldn't make htmx replace only a subset of returned elements,
the second reason is that we have a cache implemented in the backend
already so the only cost added is that we query the cache a few times
(which is sure to be populated due to the initial request), and the last
reason is that since the last refactor of this functionality that
removed jQuery we don't properly send the "not ready" entries as the
backend expects `FormData` with `f[]` and we send a JSON with `f` so we
always query for all rows anyway.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 937e8b55149388840bbf6c4d7216495bc3dd2fe9)
To avoid conflicting with User.GetDisplayName, because there is no data
type in template.
And it matches other methods like GetActFullName / GetActUserName
(cherry picked from commit 3f081d4b54261c1b4ee4f1df40c610fdd9581ef2)
The value passed into "attachments" sub-template is from
"RedneredContent", so use the same name for consistent. And it makes
readers easy to know its data type.
(cherry picked from commit b8a598e6a43fa65db23b88d3b3b281b5f2f7c2e0)
Str2html was abused a lot. So use a proper name for it: SanitizeHTML
And add some tests to show its behavior.
(cherry picked from commit fb42972c057364a1dc99dfb528554e7a94415be7)
Conflicts:
docs/content/administration/mail-templates.en-us.md
docs/content/administration/mail-templates.zh-cn.md
prefer their version always
This PR touches the most interesting part of the "template refactoring".
1. Unclear variable type. Especially for "web/feed/convert.go":
sometimes it uses text, sometimes it uses HTML.
2. Assign text content to "RenderedContent" field, for example: `
project.RenderedContent = project.Description` in web/org/projects.go
3. Assign rendered content to text field, for example: `r.Note =
rendered content` in web/repo/release.go
4. (possible) Incorrectly calling `{{Str2html
.PackageDescriptor.Metadata.ReleaseNotes}}` in
package/content/nuget.tmpl, I guess the name Str2html misleads
developers to use it to "render string to html", but it only sanitizes.
if ReleaseNotes really contains HTML, then this is not a problem.
(cherry picked from commit e71eb8930a5d0f60874b038c223498b41ad65592)
Conflicts:
modules/templates/util_string.go
trivial context conflict
Ported the function as-is and added comments so we don't forget about
this in the future.
Fixes: https://github.com/go-gitea/gitea/issues/29462
(cherry picked from commit 82405f808d7b50c3580f26e5ca645e2ed6d284ab)
Thanks to inferenceus : some sort orders on the "explore/users" page
could list users by their lastlogintime/updatetime.
It leaks user's activity unintentionally. This PR makes that page only
use "supported" sort orders.
Removing the "sort orders" could also be a good solution, while IMO at
the moment keeping the "create time" and "name" orders is also fine, in
case some users would like to find a target user in the search result,
the "sort order" might help.
(cherry picked from commit eedb8f41297c343d6073a7bab46e4df6ee297a90)
Some specific events on Gitlab issues and merge requests are stored
separately from comments as "resource state events". With this change,
all relevant resource state events are downloaded during issue and merge
request migration, and converted to comments.
This PR also updates the template used to render comments to add support
for migrated comments of these types.
ref: https://docs.gitlab.com/ee/api/resource_state_events.html
(cherry picked from commit 17f170ee3724d8bdf2ddaad4211b12433f78ff0e)
This partially reverts c41b2c73ef21d5c54c7f2658ceffaa163b135131: for the
sake of consistency, the title of a release should always be a link,
whether it's a tag-only release or not.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- When a user goes opens a symlink file in Forgejo, the file would be
rendered with the path of the symlink as content.
- Add a button that is shown when the user opens a *valid* symlink file,
which means that the symlink must have an valid path to an existent
file and after 999 follows isn't a symlink anymore.
- Return the relative path from the `FollowLink` functions, because Git
really doesn't want to tell where an file is located based on the blob ID.
- Adds integration tests.
- This was incorrectly copied from the `swaggerCommitList` struct, which
on the other hand does set `X-Total`, but the API handler that uses this
response only sets `X-Total-Count`.
In #2445, I lifted out the fork button into its own template, but did
not update it properly. This resulted in the fork button's counter not
displaying, and pointing to the wrong place too.
This patch updates the template to account for it moving to a separate
file, and also adds test cases to verify the button is display as it
should be.
Fixes#2494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Continuation of #2444, which introduced the commit
bf7fb89178 but only added
the label and the tests.
The tooltip explaining what AGit is and its advantages is not
meant to advertise AGit - it is meant to inform the reader that
is presumably not familiar with the workflow that they will not
be able to find a fork or a branch associated with the Pull Request
as a direct consequence of this workflow.
Issue #2474 mentions that we should show instructions on how to
fetch an AGit-created Pull Request, and this is the plan. However,
this may take time, so I might as well make the label a bit more
"complete" and less out-of-place for now if we do not manage to
improve these instructions until the next release (Forgejo v1.22).
Refs: https://codeberg.org/forgejo/forgejo/issues/2474
When viewing a tag that isn't associated with a release, highlight the
"N Tags" sub-menu item, rather than the "M releases" one.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Follow #29165
* some of them are incorrect, which would lead to double escaping (eg:
`(print (Escape $.RepoLink)`)
* other of them are not necessary, because `Tr` handles strings&HTML
automatically
Suggest to review by "unified view":
https://github.com/go-gitea/gitea/pull/29394/files?diff=unified&w=0
(cherry picked from commit d2f6588b66549b33adf8bac7044d03c89d668470)
Conflicts:
templates/code/searchcombo.tmpl
templates/mail/auth/register_notify.tmpl
templates/mail/issue/default.tmpl
templates/repo/code/recently_pushed_new_branches.tmpl
templates/repo/search.tmpl
templates/repo/settings/protected_branch.tmpl
templates/user/auth/activate.tmpl
templates/user/auth/forgot_passwd.tmpl
templates/user/dashboard/feeds.tmpl
context
After this PR: no need to play with the Safe/Escape tricks anymore. See
the changes for more details.
(cherry picked from commit f9207b09479df964872d68842469991042b5497f)
Conflicts:
templates/repo/issue/view_title.tmpl
templates/user/settings/applications.tmpl
context
- Removed all jQuery AJAX calls and replaced with htmx
- Tested the code diff expansion buttons functionality and it works as
before plus a loading indicator
# Demo using `htmx` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 4e3d81e44ee3f504f7262966533305561e04101f)
RenderEmojiPlain(emoji.ReplaceAliases) should be called explicitly for
some contents, but not for everything.
Actually in modern days, in most cases it doesn't need such
"ReplaceAliases". So only keep it for issue/PR titles.
If anyone really needs to do ReplaceAliases for some contents, I will
propose a following fix.
(cherry picked from commit 10c7996b5a5c705964fc6cc9c1817eea1fc436ef)
Conflicts:
templates/base/head.tmpl
context
This is the implementation of Recent Commits page. This feature was
mentioned on #18262.
It adds another tab to Activity page called Recent Commits. Recent
Commits tab shows number of commits since last year for the repository.
(cherry picked from commit d3982bcd814bac93e3cbce1c7eb749b17e413fbd)
Adds a new API `/repos/{owner}/{repo}/commits/{sha}/pull` that allows
you to get the merged PR associated to a commit.
---------
Co-authored-by: 6543 <6543@obermui.de>
(cherry picked from commit 0a426cc575734e5eff410d6a790f40473117f753)
GitLab generates "system notes" whenever an event happens within the
platform. Unlike Gitea, those events are stored and retrieved as text
comments with no semantic details. The only way to tell whether a
comment was generated in this manner is the `system` flag on the note
type.
This PR adds detection for a new specific kind of event: Changing the
target branch of a PR. When detected, it is downloaded using Gitea's
type for this event, and eventually uploaded into Gitea in the expected
format, i.e. with no text content in the comment.
This PR also updates the template used to render comments to add support
for migrated comments of this type.
ref:
11bd6dc826/app/services/system_notes/merge_requests_service.rb (L102)
(cherry picked from commit 6e5966597c2d498d1a8540dad965461d44ff8e57)
### Overview
This is the implementation of Code Frequency page. This feature was
mentioned on these issues: #18262, #7392.
It adds another tab to Activity page called Code Frequency. Code
Frequency tab shows additions and deletions over time since the
repository existed.
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/2603504f-aee7-4929-a8c4-fb3412a7a0f6">
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/58c03721-729f-4536-a663-9f337f240963">
---
#### Features
- See additions deletions over time since repository existed
- Click on "Additions" or "Deletions" legend to show only one type of
contribution
- Use the same cache from Contributors page so that the loading of data
will be fast once it is cached by visiting either one of the pages
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 875f5ea6d83c8371f309df99654ca3556623004c)
Extract from #20549
This PR added a new option on app.ini `[admin]USER_DISABLED_FEATURES` to
allow the site administrator to disable users visiting deletion user
interface or allow.
This options are also potentially allowed to define more features in
future PRs.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 3ef6252e06a1f3981f8b7d1717bfc581418b1dc5)
Conflicts:
custom/conf/app.example.ini
docs/content/administration/config-cheat-sheet.en-us.md
modules/setting/admin.go
context
GitLab generates "system notes" whenever an event happens within the
platform. Unlike Gitea, those events are stored and retrieved as text
comments with no semantic details. The only way to tell whether a
comment was generated in this manner is the `system` flag on the note
type.
This PR adds detection for two specific kinds of events: Scheduling and
un-scheduling of automatic merges on a PR. When detected, they are
downloaded using Gitea's type for these events, and eventually uploaded
into Gitea in the expected format, i.e. with no text content in the
comment.
This PR also updates the template used to render comments to add support
for migrated comments of these two types.
ref:
11bd6dc826/app/services/system_notes/merge_requests_service.rb (L6-L17)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a70c00b80bcb5de8479e407f1b8f08dcf756019d)
- If the user is searching repositories with an specific topic, adding
any other filter option, such as showing unrelevant repositories or
using another sort Forgejo should remember that 'topic only' was set.
- Adds integration test.
- Resolves#2461
For small, personal self-hosted instances with no user signups, the fork
button is just a noise. This patch allows disabling them like stars can
be disabled too.
Disabling forks does not only remove the buttons from the web UI, it
also disables the routes that could be used to create forks.
Fixes#2441.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The form used by the diff patch operation requires that the value of
`tree_path` is set, even though it's not used. Set it to `patch` so this
feature can be used again.
- Regression of 08fe6f8c7e.
- Instead of relying on JSON to convert the struct to map, use
`reflect` to do this conversion. Also simplify it a bit by only passing
one variable to the template.
- This avoids issues where the conversion to JSON causes changes in
the value, for example huge numbers are converted to its scientific
notation but are consequently not converted back when being displayed.
- Adds unit tests.
- Resolves an issue where the amount of comments is being displayed in
scientific notation on Codeberg.
It's possible for reviews to not be assiocated with users, when they
were migrated from another forge instance. In the migration code,
there's no sanitization check for author names, so they could contain
HTML tags and thus needs to be properely escaped.
- In order to determine if the "Add more..." tab should be shown, the
template has to know if the repository has all units enabled, this is
done in the repository header which can be shown for quite a lot of
pages (code, issues, projects, actions etc.)
- This was previously set in the `RepoRefByType` function, which would
be called by pages such as code, issues and releases, but it was not
being called for all pages such as actions, packages and wiki. Which
would in turn incorrectly show the "Add more..." button when it
shouldn't.
- Now call it from the template itself, so the value is 'always' loaded
when necessary.
Since #26254, it started using `{{ctx.Locale.Tr ...}}`
Now the `ctx` seems stable enough, so the check could be removed.
(cherry picked from commit 567a68a0bf78c8d70f08c8ab948fdbb455225aa9)
Follow #29165.
* Introduce JSONTemplate to help to render JSON templates
* Introduce JSEscapeSafe for templates. Now only use `{{ ... |
JSEscape}}` instead of `{{ ... | JSEscape | Safe}}`
* Simplify "UserLocationMapURL" useage
(cherry picked from commit 31bb9f3247388b993c61a10190cfd512408ce57e)
Follow #29165. These HTML strings are safe to be rendered directly, to
avoid double-escaping.
(cherry picked from commit a784ed3d6c6946fd9bf95f2e910f52f549326fe2)
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
2 instances of `for` with a wrong value and 1 `for` that had a reference
to a `name` instead of `id`.
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 1d275c1748a75a01c270f5c306c5248808016aba)
- following organization is broken from #28908
- add login check for the follow button in organization profile page
(cherry picked from commit 68227996a7a84a240b36c304d04c5c8d82948df8)
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c70f65e83bc1876fb368fd117d342573ff18a9e8)
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes#847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
The issue filter links should not be crawled by search engines, because
they they only filter results, and contain nothing new, yet, they put a
considerable load on the server.
To stop - well behaving - search engines from following these links, add
a `rel="nofollow"` property to them. The same property is already
present on the archive download links, and plenty of other places.
Fixes#2361.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
There are a few inconsistencies within Gitea and this PR addresses one of them.
This PR updates the sign-in page layout, including the register and openID tabs,
to match the layout of the settings pages (`/user/settings`) for more consistency.
**Before**
<img width="968" alt="Screenshot 2024-02-05 at 8 27 24 AM"
src="https://github.com/go-gitea/gitea/assets/6152817/fb0cb517-57c0-4eed-be1d-56f36bd1960d">
**After**
<img width="968" alt="Screenshot 2024-02-05 at 8 26 39 AM"
src="https://github.com/go-gitea/gitea/assets/6152817/428d691d-0a42-4a67-a646-05527f2a7b41">
---------
Co-authored-by: rafh <rafaelheard@gmail.com>
(cherry picked from commit 1c14cd0c43d670fef984068e2666641ea5a062db)
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
If a repository administrator is viewing a repository, and there are
units that can be enabled, display an "Add more..." link that leads to
the repository unit settings page.
The goal here is to allow instances to configure a small set of repo
units to be enabled by default, but also highlight for repo admins that
they can add more.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Use maintained fork https://github.com/golangci/misspell
- Rename `mispell-check` to `lint-spell`, add `lint-spell-fix`
- Run `lint-spell` in separate actions step
- Lint more files, fix discovered issues
- Remove inaccurate and outdated info in docs (we do not need GOPATH for
tools anymore)
Maybe later we can add more spellchecking tools, but I have not found
any good ones yet.
(cherry picked from commit 9c39f8515fa88d644736c6773d7a05d070a02e82)
Conflicts:
.github/workflows/pull-compliance.yml
Makefile
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "Self Check" menu essentially runs the collation check that is also
performed at startup, and displays the results. This is only a thing for
MariaDB/MySQL and MSSQL. As such, the menu item should only be available
for these database types.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 0ca118fdc3)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
- When a commit references a pull request, the detail strings should
reflect that. Add a new translation string for the pull request.
- Added integration tests.
- Resolves#2256
(cherry picked from commit 0d054cd4d9)
- When there's a succesful POST operation, it should return a 201 status
code (which is the status code for succesful created) and additionally
the created object.
- Currently for the `POST /repos/{owner}/{repo}/tags` endpoint an 200
status code was documented in the OpenAPI specification, while an 201
status code was actually being returned. In this case the code is
correct and the documented status code needs to be adjusted.
- Resolves#2200
(cherry picked from commit a2939116f5)
(cherry picked from commit 22cff41585)
(cherry picked from commit b23a7f27bb)
When comparing branches, only offer those branches to use as a base
where the repository allows pull requests. Those that do not allow pull
request would result in a 404, so offering them as an option would be
misleading.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2194
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 022d0e0d71)
(cherry picked from commit 957990b36a)
(cherry picked from commit 6d2df72825)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d)
(cherry picked from commit 70c5e2021d)
(cherry picked from commit 48b25be67a)
- The name could be conflucted with the `GET
/user/applications/oauth2/{id}` operation, as it only differed in a
single letter being uppercase. Change it to be
userGetOAuth2Application**s**, as that's also more accurate for this function.
- Resolves#2163
(cherry picked from commit 1891dac547)
(cherry picked from commit 68fceb9b7a)
(cherry picked from commit 7335d6de54)
- Document the correct content types for Git archives. Add code that
actually sets the correct application type for `.zip` and `.tar.gz`.
- When an action (POST/PUT/DELETE method) was successful, an 204 status
code should be returned instead of status code 200.
- Add and adjust integration testing.
- Resolves#2180
- Resolves#2181
(cherry picked from commit 6c8c4512b5)
(cherry picked from commit 3f74bcb14d)
(cherry picked from commit 6ed9057fd7)
The message telling us that we recently pushed on a branch should
include a link to said branch, not just a "New pull request" button.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d9662d03a4)
(cherry picked from commit 2527e09125)
(cherry picked from commit 0ddefdf9f4)
(cherry picked from commit e9ff354f7c)
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 8b4ba3dce7)
(cherry picked from commit 196edea0f9)
[GITEA] POST /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments (squash) do not implicitly create a review
If a comment already exists in a review, the comment is added. If it
is the first comment added to a review, it will implicitly create a
new review instead of adding to the existing one.
The pull_service.CreateCodeComment function is responsibe for this
behavior and it will defer to createCodeComment once the review is
determined, either because it was found or because it was created.
Rename createCodeComment into CreateCodeCommentKnownReviewID to expose
it and change the API endpoint to use it instead. Since the review is
provided by the user and verified to exist already, there is no need
for the logic implemented by CreateCodeComment.
The tests are modified to remove the initial comment from the fixture
because it was creating the false positive. I was verified to fail
without this fix.
(cherry picked from commit 6a555996dc)
(cherry picked from commit b173a0ccee)
(cherry picked from commit 838ab9740a)
- Remove `container` to remove unnecessary margins being added to the
whole page.
- Specify max width for the 404 image to avoid overflow of the image.
(cherry picked from commit b1ced72ce5)
(cherry picked from commit ef5e1b01b8)
(cherry picked from commit c321af3d5f)
(cherry picked from commit d6e99436b5)
Expose the repository flags feature over the API, so the flags can be
managed by a site administrator without using the web API.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit bac9f0225d)
(cherry picked from commit e7f5c1ba14)
(cherry picked from commit 95d9fe19cf)
(cherry picked from commit 7fc51991e4)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
Files can have an RSS feed, but those only make sense when taken in the
context of a branch. There is no history to make a feed of on a tag or a
commit: they're static. Forgejo does not provide a feed for them for
this reason.
However, the file view on the web UI was offering a link to these
non-existent feeds. With this patch, it does that no longer, and only
provides a link when viewing the file in the context of a branch.
Fixes#2102.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b48d21ea7)
(cherry picked from commit 70cb266760)
(cherry picked from commit 69b45c3fea)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 639a2c0741)
Adds `[repository].DOWNLOAD_OR_CLONE_METHODS` (defaulting to
"download-zip,download-targz,download-bundle,vscode-clone"), which lets
an instance administrator override the additional clone methods
displayed on the repository home view.
This is purely display-only, the clone methods not listed here are still
available, unless disabled elsewhere. They're just not displayed.
Fixes#710.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2aadcf4946)
(cherry picked from commit 42ac34fbf9)
(cherry picked from commit bd231b0245)
(cherry picked from commit 3d3366dbbe)
(cherry picked from commit 0157fb9b88)
(cherry picked from commit bee88f6a83)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
FixesCodeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b74439922)
(cherry picked from commit 337cf62c10)
(cherry picked from commit b6786fdb32)
(cherry picked from commit a5d2829a10)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72e)
(cherry picked from commit 42c55e494e)
(cherry picked from commit e3463bda47)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
(cherry picked from commit e2da5d7fe1)
(cherry picked from commit 3a80534d4d)
- Switch the supported schemas for the Swagger API around, such that
https is the first one listed. This ensures that when the Swagger API is
used it will default to the https schema, which is likely the schema you
want to use in the majority of the cases.
- Resolves#1895
BREAKING CHANGE NOTICE:
If you are using the Swagger API JSON directly to communicate with the
Forgejo API, the library you are using may be using the first schema
defined in the JSON file (e.g. https://code.forgejo.org/swagger.v1.json)
to construct the request url, this used to be `http` but has now changed
to `https`. This can cause failures if you want to send the swagger
request over `http` (and there is no HTTPS redirection configured).
(cherry picked from commit 81e5f43886)
(cherry picked from commit d847469ea2)
(cherry picked from commit 96e75e1d5c)
(cherry picked from commit 65baa64261)
(cherry picked from commit cd3e0a74e6)
(cherry picked from commit a3127e90b2)
(cherry picked from commit 2b22272dc5)
(cherry picked from commit 7363790592)
(cherry picked from commit 432b9a4451)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
The installation instructions of a Maven package places the `url` child
of the `repository` node in an extra indentation level. This indentation
is unnecesary since both the `id` and `url` nodes are direct children of
the `repository` node.
This commit removes the unnecessary indentation.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1534
(cherry picked from commit 82f0ddad7b)
(cherry picked from commit 905e546549)
(cherry picked from commit 4e58ab82b7)
(cherry picked from commit 2f207e7deb)
(cherry picked from commit 3b8cc8ad2c)
(cherry picked from commit ca8565450c)
(cherry picked from commit df5ed97ed0)
(cherry picked from commit fc1e529894)
(cherry picked from commit ef8810c09d)
(cherry picked from commit a2d1459c4d)
(cherry picked from commit 30e0d7bff0)
(cherry picked from commit ccb9ed98b9)
(cherry picked from commit 3782794fb4)
(cherry picked from commit 9e7d5b5de9)
(cherry picked from commit 50687eaebe)
(cherry picked from commit 28ae93f18e)
(cherry picked from commit e59f467284)
(cherry picked from commit 5e24444bfa)
- Make it consistent with the other modals of the dangerous actions.
(cherry picked from commit 576d7ec759)
(cherry picked from commit 8b1225f974)
(cherry picked from commit c2c47972ee)
(cherry picked from commit eec301806b)
(cherry picked from commit 6b5e728f0a)
(cherry picked from commit 3681691e65)
(cherry picked from commit e39dfa550d)
(cherry picked from commit 0c78c8c5ac)
(cherry picked from commit 661cf72db0)
[GITEA] Tidy up archive modal (squash) ctx.Locale
(cherry picked from commit 4bb6ee71f0)
(cherry picked from commit ddafd8fbe3)
(cherry picked from commit 9467a6915f)
(cherry picked from commit e632b10380)
(cherry picked from commit 6609d07591)
(cherry picked from commit c130b8a09a)
(cherry picked from commit 1080de5754)
(cherry picked from commit a9813744d4)
(cherry picked from commit 93232f410a)
(cherry picked from commit 1bf1c6b6c1)
(cherry picked from commit cb703ac292)
(cherry picked from commit ac48797029)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
[FEAT] add Forgejo Git Service (squash) register a Forgejo factory
If the Forgejo factory for the Forgejo service is not registered,
newDownloader will fallback to a git service and not migrate issues
etc.
Refs: https://codeberg.org/forgejo/forgejo/issues/1678
(cherry picked from commit 51938cd161)
[FEAT] add Forgero Git Service
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
(cherry picked from commit a878adfe62)
Adding description and Forgejo SVG
(cherry picked from commit 13738c0380)
Undo reordering and tmpl redirection
(cherry picked from commit 9ae51c46f4)
(cherry picked from commit 70fffdc61d)
(cherry picked from commit c0ebfa9da3)
(cherry picked from commit 9922c92787)
(cherry picked from commit 00c0effbc7)
(cherry picked from commit e4c9525b13)
(cherry picked from commit 09d7b83211)
(cherry picked from commit bbcd5975c9)
(cherry picked from commit 55c70a0e18)
(cherry picked from commit 76596410c0)
(cherry picked from commit 1308043931)
(cherry picked from commit 919d6aedfe)
[FEAT] add Forgero Git Service (squash) more tests
Previously only Gitea service was being tested under self-hosted migrations. Since Forgejo is also self-hosted and in fact use the same downloader/migrator we can add to this suite another test that will do the same, migrating the same repository under the same local instance but for the Forgejo service (represented by 9)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1709
Co-authored-by: zareck <cassiomilczareck@gmail.com>
Co-committed-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit 40a4b8f1a8)
(cherry picked from commit 3198b4a642)
(cherry picked from commit 4edda1f389)
(cherry picked from commit 4d91b77d29)
(cherry picked from commit afe85c52e3)
(cherry picked from commit 5ea7df79ad)
(cherry picked from commit a667182542)
(cherry picked from commit a9bebb1e71)
(cherry picked from commit 4831a89e46)
(cherry picked from commit e02a74651f)
(cherry picked from commit 05dcef59aa)
(cherry picked from commit c8bac187f9)
(cherry picked from commit c87903a0cc)
As the docs of codeberg refer to the strings printed by the Forgejo
ssh servers, this is user-facing and is nice to update to the new
product name.
(cherry picked from commit 103991d73f)
(cherry picked from commit 2a0d3f85f1)
(cherry picked from commit eb2b4ce388)
(cherry picked from commit 0998b51716)
[BRANDING] forgejo log message
(cherry picked from commit d51a046ebe)
(cherry picked from commit d66e1c7b6e)
(cherry picked from commit b5bffe4ce8)
(cherry picked from commit 3fa776d856)
(cherry picked from commit 18d064f472)
(cherry picked from commit c95094e355)
(cherry picked from commit 5784290bc4)
(cherry picked from commit aee336886b)
(cherry picked from commit ec2f60b516)
(cherry picked from commit 7af742a284)
(cherry picked from commit f279e2a264)
(cherry picked from commit fd38cfb14e)
(cherry picked from commit 64c8226618)
(cherry picked from commit b546fb2304)
(cherry picked from commit ad10202177)
(cherry picked from commit c89cab9c2b)
(cherry picked from commit 9579322ec2)
(cherry picked from commit 16b44ad18d)
(cherry picked from commit 2571ff703b)
(cherry picked from commit ad61d9ce9b)
(cherry picked from commit 9b2c45d4d3)
(cherry picked from commit ed01b79a59)
(cherry picked from commit d040b66427)
(cherry picked from commit ffe0bbea48)
(cherry picked from commit 4c1b2c409b)
(cherry picked from commit 3d8338ed10)
(cherry picked from commit a92f044ea9)
[BRANDING] link to forgejo.org/docs instead of docs.gitea.io
(cherry picked from commit 3efafd0e08)
(cherry picked from commit 148185e34b)
(cherry picked from commit 834e264698)
(cherry picked from commit e72fa6eb1e)
[BRANDING] link to forgejo.org/docs instead of docs.gitea.io
Fix the link that was 404.
(cherry picked from commit ae515d7258)
(cherry picked from commit facc2367f0)
(cherry picked from commit 25784b9f21)
(cherry picked from commit 2efc6138d9)
(cherry picked from commit b9d0871631)
(cherry picked from commit f0446e51b9)
(cherry picked from commit 1638aa67fb)
(cherry picked from commit 290db6a018)
(cherry picked from commit 89b87cf542)
(cherry picked from commit 656ed94962)
(cherry picked from commit 036f879f96)
(cherry picked from commit 69eea35f81)
(cherry picked from commit b72e3f4a92)
(cherry picked from commit af606b8574)
(cherry picked from commit 7e47f8135c)
(cherry picked from commit 0e5218cc53)
(cherry picked from commit 7c2a20a528)
(cherry picked from commit 4e94006363)
(cherry picked from commit e47cdfc43f)
(cherry picked from commit 1dcb3e1da4)
(cherry picked from commit 67367c4e0f)
(cherry picked from commit 252087d1ff)
(cherry picked from commit f5977a43e5)
Conflicts:
templates/base/head_navbar.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 594938eb15)
(cherry picked from commit 0257d038a7)
(cherry picked from commit 72821dd140)
[BRANDING] s/gitea/forgejo/ in HTML placeholders
Replaced Gitea branding with Forgejo for input placeholders
Closes: #686
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/752
(cherry picked from commit 6160d37ca9)
(cherry picked from commit df61138c7e)
(cherry picked from commit 1f30566c3f)
(cherry picked from commit 539bb825f5)
(cherry picked from commit bee0f66c86)
(cherry picked from commit 60ad005c95)
(cherry picked from commit 282e26222e)
(cherry picked from commit f9ca551f3d)
(cherry picked from commit b2e04b04c3)
(cherry picked from commit c8f395a03c)
(cherry picked from commit 0d58ce49ae)
(cherry picked from commit c602ddf91e)
(cherry picked from commit 029e37271e)
(cherry picked from commit fdaa96b3cc)
(cherry picked from commit 515d99e27d)
(cherry picked from commit da73274ba1)
(cherry picked from commit ce90b696a0)
(cherry picked from commit b6bf98763b)
(cherry picked from commit 5b380d22d7)
[BRANDING] How to start a runner: URL to Actions admin documentation
(cherry picked from commit da91799e6f)
(cherry picked from commit 28231663b6)
(cherry picked from commit 533a90345b)
(cherry picked from commit 6a0e4e55dd)
(cherry picked from commit f47cd611c6)
(cherry picked from commit 001264b784)
(cherry picked from commit e4099e9bb9)
(cherry picked from commit 3a1885649f)
(cherry picked from commit c42802c710)
(cherry picked from commit a611ce8d6d)
(cherry picked from commit a3d7d10a80)
(cherry picked from commit 52adde671f)
(cherry picked from commit c9a3820fef)
(cherry picked from commit dce40997c9)
(cherry picked from commit 312a6b92f3)
[BRANDING] package templates & links
- Change Gitea to Forgejo where necessary.
- Point all documentation to Forgejo's documentation.
- Resolves#992
(cherry picked from commit d0b78a6ede)
(cherry picked from commit e2382f30ba)
(cherry picked from commit c41cf05a33)
(cherry picked from commit 797e598ae7)
(cherry picked from commit 970031a1c2)
(cherry picked from commit 0c1180e2e1)
Conflicts:
templates/package/content/alpine.tmpl
templates/package/content/cargo.tmpl
templates/package/content/chef.tmpl
templates/package/content/composer.tmpl
templates/package/content/conan.tmpl
templates/package/content/conda.tmpl
templates/package/content/container.tmpl
templates/package/content/cran.tmpl
templates/package/content/debian.tmpl
templates/package/content/generic.tmpl
templates/package/content/go.tmpl
templates/package/content/helm.tmpl
templates/package/content/maven.tmpl
templates/package/content/npm.tmpl
templates/package/content/nuget.tmpl
templates/package/content/pub.tmpl
templates/package/content/pypi.tmpl
templates/package/content/rpm.tmpl
templates/package/content/rubygems.tmpl
templates/package/content/swift.tmpl
templates/package/content/vagrant.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 42ac9ff2ab)
(cherry picked from commit e390000bce)
(cherry picked from commit 56a437b29b)
Conflicts:
templates/package/content/cargo.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1466
[BRANDING] s/Gitea/Forgejo/ in user visible help & comments
- Modify the README of the docker directory to point to the relevant
docker files and documentation for Forgejo.
(cherry picked from commit aca6371215)
(cherry picked from commit 0ba96b1bc4)
(cherry picked from commit 5c8e6b53f1)
Conflicts:
docker/README.md
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit b3121c8004)
(cherry picked from commit 607f870416)
(cherry picked from commit 191d96afe4)
[BRANDING] healthcheck/check.go
(cherry picked from commit d703a236ce)
(cherry picked from commit d84ce3ff20)
(cherry picked from commit 2dbb844606)
(cherry picked from commit 14d3ae7e3a)
[BRANDING] s/Gitea/Forgejo/g in CLI output
(cherry picked from commit 7543c126bb)
(cherry picked from commit b66f422fc3)
(cherry picked from commit a81e4e46f3)
[BRANDING] Gitea->Forgejo in mailer code
(cherry picked from commit b91afea4ff)
(cherry picked from commit 5d7428167c)
(cherry picked from commit ed8101ba6c)
[BRANDING] use 'Forgejo' for Discord, Packagist, and Slack webhooks
Refs: https://codeberg.org/forgejo/forgejo/issues/1387
(cherry picked from commit 7dc3a05f5b)
(cherry picked from commit 133f2fc6cc)
[BRANDING] cmd/manager.go
(cherry picked from commit d1dba2c79d)
[BRANDING] pyproject.toml
(cherry picked from commit 7e8c868db2)
(cherry picked from commit 2395995c8b)
(cherry picked from commit dd6fbbf332)
Conflicts:
templates/package/content/cargo.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1548
(cherry picked from commit 6f9a5d5cab)
(cherry picked from commit d0635c4a07)
(cherry picked from commit 5f9a8c5744)
(cherry picked from commit 10b96c4567)
(cherry picked from commit 717d52e928)
(cherry picked from commit 5debdb103e)
(cherry picked from commit ded1c1700e)
(cherry picked from commit 52aa23cf7a)
(cherry picked from commit 882c942b06)
(cherry picked from commit 73fc2d2ea8)
Conflicts:
cmd/actions.go
cmd/doctor.go
cmd/keys.go
https://codeberg.org/forgejo/forgejo/pulls/1976
(cherry picked from commit 6180ef24dc)
(cherry picked from commit 8970fa2bf8)
Conflicts:
templates/package/content/debian.tmpl
https://codeberg.org/forgejo/forgejo/pulls/2074
Fix a typo in docker/README.md
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2e5df79dfb)
(cherry picked from commit 2bf6ce5b81)
(cherry picked from commit 8ec779277d)
(cherry picked from commit 6048fc66e8)
(cherry picked from commit 162538c722)
(cherry picked from commit 646bb99650)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Use TXT records in order to determine the latest available version.
- This addresses a valid privacy issue, as with HTTP requests the server
can keep track(estimated) of how many instances are using Forgejo, with
DNS that's basically not possible as the server will never receive any
data, as the only ones receiving data are DNS resolvers.
(cherry picked from commit 0baefb546a)
(cherry picked from commit e8ee41880b)
(cherry picked from commit 7eca4f3bf1)
(cherry picked from commit 6dde3992dc)
(cherry picked from commit fb3a37fbfc)
(cherry picked from commit 8304af1e9d)
(cherry picked from commit 0543a7d12a)
(cherry picked from commit c3a22933b7)
(cherry picked from commit e243707694)
(cherry picked from commit 7eb6d1bcf7)
(cherry picked from commit 1d7b9535cd)
(cherry picked from commit 05920dce67)
(cherry picked from commit f173f27d7c)
(cherry picked from commit 90e1c9340e)
(cherry picked from commit de68610ea7)
(cherry picked from commit 8d5757ea04)
(cherry picked from commit c7a7fff316)
(cherry picked from commit 39ac8b8fc1)
(cherry picked from commit 9889203301)
[PRIVACY]: Adjust update checker description
- Resolves#323
- Adjust the description of the update check function on the
installation page to describe the privacy method instead of the HTTP
method by checking gitea.io
(cherry picked from commit 61eae5b105)
(cherry picked from commit 091def20a1)
(cherry picked from commit d5d11bf45a)
(cherry picked from commit 71863d4707)
(cherry picked from commit 11ece4aab1)
(cherry picked from commit afdd7e714f)
(cherry picked from commit 39170e2f1d)
(cherry picked from commit 4b3a52aab8)
(cherry picked from commit 9d763c5fc8)
(cherry picked from commit 638db15482)
(cherry picked from commit a52bfdd8e7)
(cherry picked from commit dc93d00e85)
(cherry picked from commit 0bc4b3508c)
(cherry picked from commit 3f760d85a4)
(cherry picked from commit ecc2716785)
(cherry picked from commit 6334d5677e)
Conflicts:
modules/updatechecker/update_checker.go
UpdateRemoteVersion now has a context argument. However, in
the updated code from Gitea the context comes from the HTTP
request and does not actually provide any useful context.
Replace that with context.Background()
(cherry picked from commit ca2200767e)
(cherry picked from commit f46feca224)
(cherry picked from commit a800a66ca8)
(cherry picked from commit 21f017454e)
(cherry picked from commit 762d18e09a)
(cherry picked from commit 6d28e120c1)
(cherry picked from commit 4fcd7e7cbf)
(cherry picked from commit 9516285112)
(cherry picked from commit 0dd752a262)
(cherry picked from commit b1f1af7fe0)
(cherry picked from commit 71937deaa5)
(cherry picked from commit 93e41a7823)
(cherry picked from commit f497ed30cf)
(cherry picked from commit bff3346f7d)
(cherry picked from commit 906ae19c0f)
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
(cherry picked from commit a57b214e36)
(cherry picked from commit fd287a9134)
