There was a mistake in the template file: `templates/mail/issue/assigned.tmpl`
where the repourl was generated from a non-existent release instead of the issue.
This PR changes this to use the issue but also ensure that the issue repo is loaded.
It also slightly improves the English locale string.
Fix#17160
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
This PR changes the compare page to make the "..." in the between branches a clickable
link. This changes the comparison type from "..." to "..". Similarly it makes the
initial compare icon clickable to switch the head and base branches.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix#4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add SkipLocal2FA option to other pam and smtp sources
Extend #16954 to allow setting skip local 2fa on pam and SMTP authentication sources
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make SkipLocal2FA omitempty
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* DBContext is just a Context
This PR removes some of the specialness from the DBContext and makes it context
This allows us to simplify the GetEngine code to wrap around any context in future
and means that we can change our loadRepo(e Engine) functions to simply take contexts.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix unit tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* another place that needs to set the initial context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* avoid race
Signed-off-by: Andrew Thornton <art27@cantab.net>
* change attachment error
Signed-off-by: Andrew Thornton <art27@cantab.net>
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
https://developers.dingtalk.com/document/app/message-link-description
To open the link in browser, we should use this URL: `"dingtalk://dingtalkclient/page/link?pc_slide=false&url=" + url.QueryEscape(singleURL)`
Otherwise the page is displayed inside DingTalk client, it makes users very difficult to visit non-public URLs in DingTalk webhook messages.
This PR extends #16594 to allow LDAP to be able to be set to skip local 2FA too. The technique used here would be extensible to PAM and SMTP sources.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fixes#16381
Note that changes to unprotected files via the web editor still cannot be pushed directly to the protected branch. I could easily add such support for edits and deletes if needed. But for adding, uploading or renaming unprotected files, it is not trivial.
* Extract & Move GetAffectedFiles to modules/git
If there is an error when performing the admin or restricted filter search
ensure that the filter and the userDN are reported.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a setting to OAuth and OpenID login sources to allow the source to
skip local 2FA authentication.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
Replaces #16262
Replaces #16250
Replaces #14833
This PR first implements a `git check-attr` pipe reader - using `git check-attr --stdin -z --cached` - taking account of the change in the output format in git 1.8.5 and creates a helper function to read a tree into a temporary index file for that pipe reader.
It then wires this in to the language stats helper and into the git diff generation.
Files which are marked generated will be folded by default.
Fixes#14786Fixes#12653
When create a new issue or comment and paste/upload an attachment/image, it will not assign an issue id before submit. So if user give up the creating, the attachments will lost key feature and become dirty content. We don't know if we need to delete the attachment even if the repository deleted.
This PR add a repo_id in attachment table so that even if a new upload attachment with no issue_id or release_id but should have repo_id. When deleting a repository, they could also be deleted.
Co-authored-by: 6543 <6543@obermui.de>
Rename`[repository]` `DISABLE_MIRRORS` to `[mirror]` `DISABLE_NEW_PULL` and add `ENABLED` and `DISABLE_NEW_PUSH` with the below meanings:
- `ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors.
- `DISABLE_NEW_PULL`: **false**: Disable the creation of **new** mirrors. Pre-existing mirrors remain valid.
- `DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
The lastLeftIdx should be reset at the same time as creating a new section otherwise
it is possible for a second addition to end up attempting to read a nil entry.
Fix#16943
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix dump and restore
* return different error message for get commit
* Fix missing delete release attachment when deleting repository
* Fix ci and add some comments
Co-authored-by: zeripath <art27@cantab.net>
Gitea has relied on some slow JS code to match up added and deleted lines on the
diff pages. This can cause a considerable slow down on large diff pages.
This PR makes a small change meaning that the matching up can occur much more simply.
Partial fix#1351
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactor the fork service slightly to take ForkRepoOptions
This reduces the number of places we need to change if we want to add other
options during fork time.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Fix integrations and tests after ForkRepository refactor
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Update OldRepo -> BaseRepo
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* gofmt pass
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Unfortunately there is bug in #16544 meaning that openid connects aren't
being matched properly as the capitalisation in that PR is incorrect.
This PR changes the capitalisation back to what is expected.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add proxy settings and support for migration and webhook
* Fix default value
* Add newline for example ini
* Add lfs proxy support
* Fix lint
* Follow @zeripath's review
* Fix git clone
* Fix test
* missgin http requests for proxy
* use empty
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
* Add info about list endpoints to CONTRIBUTING.md
* Let all list endpoints return X-Total-Count header
* Add TODOs for GetCombinedCommitStatusByRef
* Fix models/issue_stopwatch.go
* Rrefactor models.ListDeployKeys
* Introduce helper func and use them for SetLinkHeader related func
When users login and are autoregistered send email notification.
Fix#16178
* Protect public functions within the mailer by testing if the mailer is configured
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Improve SMTP authentication, Fix user creation bugs and add LDAP cert/key options
This PR has two parts:
Improvements for SMTP authentication:
* Default to use SMTPS if port is 465, and allow setting of force SMTPS.
* Always use STARTTLS if available
* Provide CRAM-MD5 mechanism
* Add options for HELO hostname disabling
* Add options for providing certificates and keys
* Handle application specific password response as a failed user login
instead of as a 500.
Close#16104
Fix creation of new users:
* A bug was introduced when allowing users to change usernames which
prevents the creation of external users.
* The LoginSource refactor also broke this page.
Close#16104
Signed-off-by: Andrew Thornton <art27@cantab.net>
Followup from #16562 prepare for #16567
* Rename ctx.Form() to ctx.FormString()
* Reimplement FormX func to need less code and cpu cycles
* Move code into own file
* Fix 500 on first wiki page
There is a mistake in #16319 and #16487 which means that the first time
a wiki page is created a 500 is reported because the `master` branch is
not in existence in that wiki yet.
This PR simply checks for this error and returns not found.
Fix#16584
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR has two parts:
* Add locking to goth and gothic calls with a RWMutex
The goth and gothic calls are currently unlocked and thus are a cause of multiple potential races
* Reattempt OAuth2 registration on login if registration failed
If OAuth2 registration fails at startup we currently disable the login_source however an alternative approach could be to reattempt registration on login attempt.
Fix#16096
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix add authentication page
There is a regression in #16199 whereby the add authentication page
fails to react to the change in selected type.
This is due to the String() method on the LoginSourceType which is ameliorated
with an Int() function being added.
Following on from this there are a few other related bugs.
Fix#16541
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* Update locale_cs-CZ.ini
fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix wechat
* fix wechat
* fix wechat
* fix wechat
* Fix invalid params and typo of email templates (#16394)
Signed-off-by: Meano <meanocat@gmail.com>
* Add LRU mem cache implementation (#16226)
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Replace `plugins/docker` with `techknowlogick/drone-docker`in ci (#16407)
* plugins/docker -> techknowlogick/drone-docker
* It is multi-arch
* docs: rewrite email setup (#16404)
* Add intro for both the docs page and mailer methods
* Fix numbering level in SMTP section
* Recommends implicit TLS
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* Validate Issue Index before querying DB (#16406)
* Fix external renderer (#16401)
* fix external renderer
* use GBackground context as fallback
* no fallback, return error
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add checkbox to delete pull branch after successful merge (#16049)
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Detect encoding changes while parsing diff (#16330)
* Detect encoding changes while parsing diff
* Let branch/tag name be a valid ref to get CI status (#16400)
* fix #16384#
* refactor: move shared helper func to utils package
* extend Tests
* use ctx.Repo.GitRepo if not nil
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix build
* fix build
* Apply suggestions from code review
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: myheavily <myheavily>
Co-authored-by: zhaoxin <gitea@fake.local>
Co-authored-by: Meano <Meano@foxmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
* Fix committer shortcut properly
* Restructure gpg_keys.go
* Use common Verification Token code
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* fix: not able to update local created non-urlencoded wiki pages
* tidy code
* as per suggestion
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Don't replace space to dash for unescaped wiki filename
Co-authored-by: zeripath <art27@cantab.net>
* Remove incorrect comment
* Remove NameToUnescapedFilename()
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR removes multiple unneeded fields from the `HookTask` struct and adds the two headers `X-Hub-Signature` and `X-Hub-Signature-256`.
## ⚠️ BREAKING ⚠️
* The `Secret` field is no longer passed as part of the payload.
* "Breaking" change (or fix?): The webhook history shows the real called url and not the url registered in the webhook (`deliver.go`@129).
Close#16115Fixes#7788Fixes#11755
Co-authored-by: zeripath <art27@cantab.net>
You can limit or hide organisations. This pull make it also posible for users
- new strings to translte
- add checkbox to user profile form
- add checkbox to admin user.edit form
- filter explore page user search
- filter api admin and public user searches
- allow admins view "hidden" users
- add app option DEFAULT_USER_VISIBILITY
- rewrite many files to use Visibility field
- check for teams intersection
- fix context output
- right fake 404 if not visible
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Added support for gopher URLs.
* Add setting and make this user settable instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Remove superfluous newline before Co-authored-by trailers
* Append to existing PR description trailer section
If the existing PR description message already contains a trailer section (e.g. Signed-off-by: ),
append to it instead of creating a new trailer section.
* Reuse compiled regexp
* Simplify regex and deal with trailing \n in PR description
* Add tests for CommitMessageTrailersPattern
- add support for Key:Value (no space after colon)
- add support for whitespace "folding"
* Update services/pull/pull_test.go
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
remove log() func from gogs times and switch to proper logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Fix 500 Error with branch and tag sharing the same name #15592
Fixed 500 error while create Pull request when there are more
than one sources (branch, tag) with the same name
Fix#15592
Signed-off-by: Viktor Yakovchuk <viktor@yakovchuk.net>
* fix logging
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* #14559 Reduce amount of email notifications for WIP draft PR's
don't notify repo watchers of WIP draft PR's
* #13190 Notification when WIP Pull Request is ready for review
* Send email notification to repo watchers when WIP PR is created
* Send ui notification to repo watchers when WIP PR is created
* send specific email notification when PR is marked ready for review
instead of reusing the CreatePullRequest action
* Fix lint error
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Added tests for MS Teams.
* Added tests for Dingtalk.
* Added tests for Telegram.
* Added tests for Feishu.
* Added tests for Discord.
* Added tests for closed issue and pullrequest comment.
* Added tests for Matrix.
* Trim all spaces.
* Added tests for Slack.
* Added JSONPayload tests.
* Added general tests.
* Replaced duplicated code.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix bug when delete branch don't close related PRs
* Merge all deletebranch as one method
* Add missed branch.go
* fix comment
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
* pass context into get-last-commit
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make commit_info cancellable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use context as context
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Restructured code. Moved static checks out of loop.
* Restructured batch api. Add support for individual errors.
* Let router decide if LFS is enabled.
* Renamed methods.
* Return correct status from verify handler.
* Unified media type check in router.
* Changed error code according to spec.
* Moved checks into router.
* Removed invalid v1 api methods.
* Unified methods.
* Display better error messages.
* Added size parameter. Create meta object on upload.
* Use object error on invalid size.
* Skip upload if object exists.
* Moved methods.
* Suppress fields in response.
* Changed error on accept.
* Added tests.
* Use ErrorResponse object.
* Test against message property.
* Add support for the old invalid lfs client.
* Fixed the check because MinIO wraps the error.
* Use individual repositories.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make modules/context.Context a context.Context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify context calls
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set the base context for requests to the HammerContext
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Prevent double-login for Git HTTP and LFS and simplify login
There are a number of inconsistencies with our current methods for
logging in for git and lfs. The first is that there is a double login
process. This is particularly evident in 1.13 where there are no less
than 4 hash checks for basic authentication due to the previous
IsPasswordSet behaviour.
This duplicated code had individual inconsistencies that were not
helpful and caused confusion.
This PR does the following:
* Remove the specific login code from the git and lfs handlers except
for the lfs special bearer token
* Simplify the meaning of DisableBasicAuthentication to allow Token and
Oauth2 sign-in.
* The removal of the specific code from git and lfs means that these
both now have the same login semantics and can - if not
DisableBasicAuthentication - login from external services. Further it
allows Oauth2 token authentication as per our standard mechanisms.
* The change in the recovery handler prevents the service from
re-attempting to login - primarily because this could easily cause a
further panic and it is wasteful.
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* move shutdownfns, terminatefns and hammerfns out of separate goroutines
Coalesce the shutdownfns etc into a list of functions that get run at shutdown
rather then have them run at goroutines blocked on selects.
This may help reduce the background select/poll load in certain
configurations.
* The LevelDB queues can actually wait on empty instead of polling
Slight refactor to cause leveldb queues to wait on empty instead of polling.
* Shutdown the shadow level queue once it is empty
* Remove bytefifo additional goroutine for readToChan as it can just be run in run
* Remove additional removeWorkers goroutine for workers
* Simplify the AtShutdown and AtTerminate functions and add Channel Flusher
* Add shutdown flusher to CUQ
* move persistable channel shutdown stuff to Shutdown Fn
* Ensure that UPCQ has the correct config
* handle shutdown during the flushing
* reduce risk of race between zeroBoost and addWorkers
* prevent double shutdown
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Restore PAM user autocreation functionality
PAM autoregistration of users currently fails due to email invalidity.
This PR adds a new setting to PAM to allow an email domain to be set
or just sets the email to the noreply address and if that fails falls
back to uuid@localhost
Fix#15702
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per KN4CKER
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Decouple TestAction_GetRepoLink and TestSizedAvatarLink.
* Load database for TestCheckGPGUserEmail.
* Load database for TestMakeIDsFromAPIAssigneesToAdd.
* Load database for TestGetUserIDsByNames and TestGetMaileableUsersByIDs.
* Load database for TestUser_ToUser.
* Load database for TestRepository_EditWikiPage.
* Include AppSubURL in test.
* Prevent panic with empty slice.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* 7184- message if line too long
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* add flag on missing cases
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Andrew Thornton <art27@cantab.net>
The issue is that the TestPatch will reset the PR MergeBase - and it is possible for TestPatch to update the MergeBase whilst a merge is ongoing. The ensuing merge will then complete but it doesn't re-set the MergeBase it used to merge the PR.
Fixes the intermittent error in git test.
Signed-off-by: Andrew Thornton art27@cantab.net
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
* Implemented LFS client.
* Implemented scanning for pointer files.
* Implemented downloading of lfs files.
* Moved model-dependent code into services.
* Removed models dependency. Added TryReadPointerFromBuffer.
* Migrated code from service to module.
* Centralised storage creation.
* Removed dependency from models.
* Moved ContentStore into modules.
* Share structs between server and client.
* Moved method to services.
* Implemented lfs download on clone.
* Implemented LFS sync on clone and mirror update.
* Added form fields.
* Updated templates.
* Fixed condition.
* Use alternate endpoint.
* Added missing methods.
* Fixed typo and make linter happy.
* Detached pointer parser from gogit dependency.
* Fixed TestGetLFSRange test.
* Added context to support cancellation.
* Use ReadFull to probably read more data.
* Removed duplicated code from models.
* Moved scan implementation into pointer_scanner_nogogit.
* Changed method name.
* Added comments.
* Added more/specific log/error messages.
* Embedded lfs.Pointer into models.LFSMetaObject.
* Moved code from models to module.
* Moved code from models to module.
* Moved code from models to module.
* Reduced pointer usage.
* Embedded type.
* Use promoted fields.
* Fixed unexpected eof.
* Added unit tests.
* Implemented migration of local file paths.
* Show an error on invalid LFS endpoints.
* Hide settings if not used.
* Added LFS info to mirror struct.
* Fixed comment.
* Check LFS endpoint.
* Manage LFS settings from mirror page.
* Fixed selector.
* Adjusted selector.
* Added more tests.
* Added local filesystem migration test.
* Fixed typo.
* Reset settings.
* Added special windows path handling.
* Added unit test for HTTPClient.
* Added unit test for BasicTransferAdapter.
* Moved into util package.
* Test if LFS endpoint is allowed.
* Added support for git://
* Just use a static placeholder as the displayed url may be invalid.
* Reverted to original code.
* Added "Advanced Settings".
* Updated wording.
* Added discovery info link.
* Implemented suggestion.
* Fixed missing format parameter.
* Added Pointer.IsValid().
* Always remove model on error.
* Added suggestions.
* Use channel instead of array.
* Update routers/repo/migrate.go
* fmt
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Forms are dependent on models and therefore should be in services.
This PR also removes the old auth. aliasing
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Unexport SendUserMail
* Instead of "[]*models.User" or "[]string" lists infent "[]*MailRecipient" for mailer
* adopt
* code format
* TODOs for "i18n"
* clean
* no fallback for lang -> just use english
* lint
* exec testComposeIssueCommentMessage per lang and use only emails
* rm MailRecipient
* Dont reload from users from db if you alredy have in ram
* nits
* minimize diff
Signed-off-by: 6543 <6543@obermui.de>
* localize subjects
* linter ...
* Tr extend
* start tmpl edit ...
* Apply suggestions from code review
* use translation.Locale
* improve mailIssueCommentBatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add i18n to datas
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a comment
Co-authored-by: Andrew Thornton <art27@cantab.net>
I do not understand how this can happen or why.
There is an apparent possibility for a comment.Patch to be missing a hunk header
- this should not happen and do not understand how. But it appears to happen on
1.13 at least in some case.
This PR will simply add a new section if the cursection is empty
thus preventing the NPE.
Fix#15198
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
There are a few recurrent issues with comment as diff reporting panics that are resistant to fixing due to the fact that the panic occurs in the template render and is swallowed by the template renderer.
This PR just adds some logging to force the panic to properly logged and re-propagates back up to the template renderer so we can actually detect what the issue is.
Signed-off-by: Andrew Thornton art27@cantab.net
* Make auto check manual merge as a chooseable mod and add manual merge way on ui
as title, Before this pr, we use same way with GH to check manually merge.
It good, but in some special cases, misjudgments can occur. and it's hard
to fix this bug. So I add option to allow repo manager block "auto check manual merge"
function, Then it will have same style like gitlab(allow empty pr). and to compensate for
not being able to detect THE PR merge automatically, I added a manual approach.
Signed-off-by: a1012112796 <1012112796@qq.com>
* make swager
* api support
* ping ci
* fix TestPullCreate_EmptyChangesWithCommits
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Apply review suggestions and add test
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* fix build
* test error message
* make fmt
* Fix indentation issues identified by @silverwind
Co-authored-by: silverwind <me@silverwind.io>
* Fix tests and make manually merged disabled error on API the same
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a small nit
* fix wrong commit id error
* fix bug
* simple test
* fix test
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* make repo as "pending transfer" if on transfer start doer has no right to create repo in new destination
* if new pending transfer ocured, create UI & Mail notifications
Support create single tag directly
support create tag with message from create release ui
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
* CutDiffAroundLine makes the incorrect assumption that `---` and `+++` always represent part of the header of a diff.
This PR adds a flag to its parsing to prevent this problem and adds a streaming parsing technique to CutDiffAroundLine using an io.pipe instead of just sending data to an unbounded buffer.
Fix#14711
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle unquoted comment patch files
When making comment patches unfortunately the patch does not always quote the filename
This makes the diff --git header ambiguous again.
This PR finally adds handling for ambiguity in to parse patch
Fix#14812
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add in testing for no error
There is no way currently for CutDiffAroundLine in this test to cause an
error however, it should still be tested.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea runs diff on highlighted code fragment for each line in order to provide
code highlight diffs. Unfortunately this diff algorithm is not aware that span tags
and entities are atomic and cannot be split.
The current fixup code makes some attempt to fix these broken tags however, it cannot
handle situations where a tag is split over multiple blocks.
This PR provides a more algorithmic fixup mechanism whereby spans and entities are
completely coalesced into their respective blocks.
This may result in a incompletely reduced diff but - it will definitely prevent the
broken entities and spans that are currently possible.
As a result of this fixup several inconsistencies were discovered in our testcases
and these were also fixed.
Fix#14231
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Added option to disable web hooks
This mod introduces DISABLE_WEB_HOOKS parameter in [security] section
of app.ini (by default set to false). If set to true it disables web
hooks feature. Any existing undelivered web hook tasks will be cancelled.
Any existing web hook definitions will be left untouched in db but
its delivery tasks will be ignored.
Author-Change-Id: IB#1105130
* Webhook spelling fixed
Webhook spelling fixed.
Fixes: 07df6614dc
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-510868421
Author-Change-Id: IB#1105174
* Parameter description fixed
Parameter description fixed.
Fixes: 07df6614dc
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-514086107
Author-Change-Id: IB#1105174
* refactor models.DeleteComment and delete related reactions too
* use deleteComment for UserDeleteWithCommentsMaxDays in DeleteUser
* nits
* Use time.Duration as other time settings have
* docs
* Resolve Fixme & fix potential deadlock
* Disabled by Default
* Update Config Value Description
* switch args
* Update models/issue_comment.go
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Fix wrong type on hooktask to convert typ from char(16) to varchar(16)
* Fix bugs
* Improve code
* Use different trim function for MSSQL
* Fix bug
* Removed wrong changed line
* Removed wrong changed line
* Fix nullable
* Fix lint
* Ignore sqlite on migration
* Fix mssql modify column failure
* Move modifyColumn to migrations.go so that other migrate function could use it
Fixes#14187: mention handling extracted from email notification code
Fixes#14013: add notification for mentions in pull request code comments
Fixes#13450: Not receiving any emails with setting "Only Email on Mention"
* remove github.com/unknwon/com from models
* dont use "com.ToStr()"
* replace "com.ToStr" with "fmt.Sprint" where its easy to do
* more refactor
* fix test
* just "proxy" Copy func for now
* as per @lunny
Originally, it was filled by the commit messages of the involved
commits. In this change, we use the headline comment of the pull
request as the commit message when it is a squash merge.
Thanks to @zeripath for suggesting the idea.
Fixes#12365
Co-authored-by: Mura Li <typeless@users.noreply.github.com>
* Show dropdown with all statuses for commit
* Use popups
* Remove unnecessary change
* Style popup
* Use divided list
* As per @silverwind
* Refactor GetLastCommitStatus
* Missing dropdown on repo home and commit page
* Fix tests
* Make status icon be a part of a link on PR list
* Fix missing translation call
* Indent fix
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Show status check for merged PRs
* Handle PRs with no commits
* Styling
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Fixes#13683.
The diff snippet that provides context for a code review comment on the pull request timeline page used to be calculated based on the headCommitID. But in 1.13, with PR #13448, this changed to the commitID from the blame for the commented line, which seems to cause these incorrect review comment diff snippets.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The default branch in wikis must be master - therefore forcibly set the HEAD
to master.
Fix#13846
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
PR #13381 refactored notification actions to call NotifyCreateRef and
NotifyDeleteRef in a slightly different manner. This leads to the pusher
not being set before the call.
This PR ensures that the pusher is updated before the call.
Fix#13940
Signed-off-by: Andrew Thornton <art27@cantab.net>
fix dst refspec error in 'Push back to upstream' when base branch have
same name with a tag.
fix#13851
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
* Handle incomplete diff files properly
The code for parsing diff hunks has a bug whereby a very long line
in a very long diff would not be completely read leading to an unexpected
character.
This PR ensures that the line is completely cleared
Fix#13602
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also allow git max line length <4096
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add test case
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* When replying to an outdated comment it should not appear on the files page
This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.
There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix broken migration
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move session within the batch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* regen the sqlcmd each time round the loop
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Alternative fix for HTML diff entity split
This commit both reverts PR #13357 and uses the exiting implementation alredy used for spans to fix the same issue. That PR duplicates most of logic that is already present elsewhere and still was failing for some cases. This should be simpler as it uses the existing logic that already works for <span>s being split apart.
Added both test cases as well.
* Update gitdiff_test.go
* fmt
* entity can have uppercase letter, also add detailed comment per @zeripath
* When replying to an outdated comment it should not appear on the files page
This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.
There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* When creating line diffs do not split within an html entity
Fix#13342
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add test case
Signed-off-by: Andrew Thornton <art27@cantab.net>
* improve test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* show author for releases created outside Gitea UI.
Also show the number of commits behind the default branch for tags created outside the UI
don't show the tag date again for tags pushed to the repo. Since it is already on the sidebar and looks like duplication
* add migration for already existing tags
* update as per review
* fix build
* add space
* fix import statments
* Update models/migrations/v113.go
Co-Authored-By: zeripath <art27@cantab.net>
* Update models/migrations/v114.go
Co-authored-by: 6543 <6543@obermui.de>
* Update services/release/release.go
Co-authored-by: 6543 <6543@obermui.de>
* impruve
* remove dependency on models package
* Close the gitrepos in a defer to ensure that they are closed.
* gofmt
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix initial commit page
Unfortunately as a result of properly fixing ParsePatch the hack that
used git show <initial_commit_id> to get the diff for this failed.
This PR fixes this using the "super-secret" empty tree ref to make the
diff against.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix#13248
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update services/gitdiff/gitdiff.go
Co-authored-by: 6543 <6543@obermui.de>
* Add better error checking for inline html diff code
A better fix for #13191 which cleans up this code a bit and adds basic checking which should avoid writing broken HTML in future situations.
* Update gitdiff_test.go
* better regex
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Go-version constraints ignore pre-releases.
Rather than change the library further this PR simply changes
the git version comparison to use simple version compare ignoring the
issue of pre-releases.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix error in diff html rendering
Was missing an optional whitespace check in regex. Also noticed a rare case where diff.Type == Equal would be empty and thus get a newline attached. Fixed that too.
Fixes#13177
* Update services/gitdiff/gitdiff.go
Co-authored-by: zeripath <art27@cantab.net>
* Update gitdiff_test.go
* fmt
Co-authored-by: zeripath <art27@cantab.net>
* Fix diff skipping lines
ParsePatch previously just skipped all lines that start with "+++ " or "--- "
and makes no attempt to see these lines in context.
This PR rewrites ParsePatch to pay attention to context and position
within a patch, ensuring that --- and +++ are only skipped if
appropriate.
This PR also fixes several issues with incomplete files.
Fix https://codeberg.org/Codeberg/Community/issues/308Fix#13153
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add testcase
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix comment
* simplify error handling
Signed-off-by: Andrew Thornton <art27@cantab.net>
* never return io.EOF
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Finally fix diff names
#12771 attempted to fix diff by avoiding the git diff line as
it is possible to have an ambiguous line here.
#12254 attempted to fix diff by assuming that names would quoted
if they needed to be and if one was quoted then both would be.
Both of these were wrong.
I have now discovered `--src-prefix` and `--dst-prefix` which
means that we can set this in such a way to force the git diff
to always be unambiguous.
Therefore this PR rollsback most of the changes in #12771 and
uses these options to fix this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update services/gitdiff/gitdiff.go
* Update services/gitdiff/gitdiff.go
* Update modules/repofiles/temp_repo.go
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* [Enhancement] Allow admin to merge pr with protected file changes
As tilte, show protected message in diff page and merge box.
Signed-off-by: a1012112796 <1012112796@qq.com>
* remove unused ver
* Update options/locale/locale_en-US.ini
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
* Add TrN
* Apply suggestions from code review
* fix lint
* Update options/locale/locale_en-US.ini
Co-authored-by: zeripath <art27@cantab.net>
* Apply suggestions from code review
* move pr proteced files check to TestPatch
* Call TestPatch when protected branches settings changed
* Apply review suggestion @CirnoT
* move to service @lunny
* slightly restructure routers/private/hook.go
Adds a lot of comments and simplifies the logic
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* skip duplicate protected files check
* fix check logic
* slight refactor of TestPatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking for protected files changes in TestPatch use the temporary repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix introduced issue with hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the check on PR index being greater than 0 as it unnecessary
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
This PR updates golangci-lint to the latest version 1.31.0.
The upgrade introduced a new check for which I've fixed or disabled most cases.
Signed-off-by: kolaente <k@knt.li>
* Cache last commit when pushing for big repository
* Fix bug
* detect force push
* Refactor cache push
* Finish cache last commit info when push
* Some improvements
* Fix lint
* Remove unused changes
* Move pull request test before cache
* Fix test mysql
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
This small PR changes the webhook trigger behaviour to be more in line with what's expected. (When 'repository' events are enabled, of course)
In other words:
For system-wide or default webhooks, repository events will now trigger said webhook. Previously it had to be under an organization for create events to be visible - a tad unexpected!
Deleting a repository will now fire its own defined webhooks, not just organisational and system ones.
In order to enable the latter the webhook has to now be triggered before the actual repo undergoes deletion. I'm willing to tweak this to try and 'grab' the webhook model beforehand and trigger the webhook notifier directly afterwards, but this may make the code more complex for little benefit.
Closes#11766, #9180.
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
We should only update is_empty, default_branch and updated time columns
during commitRepoAction and not update other columns as we risk
overwriting incorrect information.
Fix#11823Fix#10536
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix test
* Add no queue for test only
* improve code
* Auto watch whatever branch operation
* Fix lint
* Rename noqueue to immediate
* Remove old PushUpdate function
* Fix tests
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
Following further testing it has become apparent that the diff line
cannot be used to determine filenames for diffs with any sort of predictability
the answer therefore is to use the other lines that are provided with a diff
Fix#12768
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix diff path unquoting
services/gitdiff/gitdiff.go whereby there it assumed that the path would
always be quoted on both sides
This PR simplifies the code here and uses fmt.Fscanf to parse the
strings as necessary.
Fix#12546
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add testcase as per @mrsdizzie
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent NPE on commenting on lines with invalidated comments
Only check for a review if we are replying to a previous review.
Prevent the NPE in #12239 by assuming that a comment without a Review is
non-pending.
Fix#12239
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add hack around to show the broken comments
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration and remove template hacks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove double indirect in NewColoredIDValue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle forced-update in mirror.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add tracing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @lafriks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
